SLIPPERY TIPS
INTERMEDIATES
come in 2 sizes
LIGHT - for
elastics
Ø 0.66mm (2) to 1.13mm (7)
and
HEAVY - for elastics
Ø 1.2mm (8) to 2.1mm (16)
Made
from the purest
PTFE compounds
and come in a specially
designed "flexible"
shape
so to move with and follow
the pole section
when under tension
As pole
section diameters
vary with each
different manufacturer
ST Intermediates are designed to cover these ranges and should
self-locate in most
quality professional level poles
Specifically designed
to fit into
cut back
tips and the
2nd section, or into a
long power tip section
as this is where most of the
bending and the side wall
drag will take place
Intermediates
are assembled
by threading them on to
fitted pole elastic
firstly,
the two smaller diameter
Intermediates go one at a time into the tip section,
inverting the section and
gently tapping down
each Intermediate will
hold them in position
Secondly,
the completed tip section with
the two fitted Intermediates
is slid though the
2nd section
followed in turn by
the final two Intermediates
once again
a slight tap down
will hold them in position,
or they usually self-locate.
If a long
power tip section
is used
thread the Intermediates
on to the elastic
and fit each one in turn
starting with the smallest.
● view
product pages
|
